Under-sink grease trap MOT 0.5
The MOT 0.5 grease separator collects grease and solid particles from kitchen wastewater. The unit is designed to be installed under a sink or behind a dishwasher
225
€
+ VAT
| Warehouse | Qty | Warehouse address | |
|---|---|---|---|
| Latvian warehouse qty | 2 | - |
Specification
The MOT 0.5 grease separator collects grease and solid particles from wastewater generated in restaurants and commercial kitchens. The unit is designed for installation under a sink or behind a dishwasher in restaurant settings.
Other applications are also possible, such as small volumes of high-fat wastewater (e.g., in food preparation areas of supermarkets, etc.).
DESCRIPTION
Emptying frequency depends on the amount of grease. The grease layer accumulating on the surface must be removed regularly.
The grease separator should be emptied and cleaned once a week. After emptying, refill the tank with water.
Other applications are also possible, such as small volumes of high-fat wastewater (e.g., in food preparation areas of supermarkets, etc.).
DESCRIPTION
- Monolithic tank made of polyethylene
- Tank equipped with an internal partition separating the main chamber from the separation chamber
- Polyethylene lid secured with two screws
- Inlet and outlet pipes with a diameter of 50 mm
- Ventilation duct with a 50 mm diameter, with left or right side connection
- Length: 420 mm
- Place the unit vertically
- Connect the inlet and outlet to the sewer system
- Connect the ventilation
- Fill the unit with warm water
Emptying frequency depends on the amount of grease. The grease layer accumulating on the surface must be removed regularly.
The grease separator should be emptied and cleaned once a week. After emptying, refill the tank with water.